Schedules

The Schedules tab lets you set time windows for automatic charging and discharging. Schedules are written directly to the inverter and run independently of the app — your phone doesn’t need to be nearby for them to work.

Slot limits by device

Device	Charge slots	Discharge slots
Gateway	10	10
All In One	10	10
All In One Hybrid	10	10
Hybrid Gen 3+	10	10
Hybrid HV Gen 3	10	10
Hybrid Gen 4	10	10
EMS	3	3
Three Phase Hybrid	2	2
Three Phase AC	2	2
AIO Commercial	2	2
Legacy Hybrid (Gen 1 & 2)	1	2
AC Coupled	1	2
Polar Hybrid	1	2

The Schedules tab shows only the slots your specific inverter supports — you won’t see options that don’t apply to your hardware.

Charge slots

Each charge slot has a start time, end time, and a target state of charge. During the slot the inverter will charge the battery from the grid (if solar isn’t sufficient) until it reaches that target.

AC Charge Enable — some inverters have a master switch that enables or disables charging from the grid entirely, separate from individual slot settings. If your inverter supports this, a toggle appears at the top of the Charge Slots section.

Example use case: charge from grid during cheap overnight tariff hours (e.g. Octopus Go, Agile off-peak).

Discharge slots

Each discharge slot has a start time, end time, and a lower SOC floor. The inverter will discharge the battery during that period but won’t go below the floor you’ve set.

Example use case: discharge during peak tariff hours to reduce import costs.

Export slots (EMS only)

EMS devices have a third section for Export Slots, controlling when surplus power is pushed to the grid. These follow the same structure as charge and discharge slots.

Managing slots

Tap + to add a slot
Tap an existing slot to edit it
Tap the toggle on the left of a slot to enable or disable it without deleting it
Swipe left to delete a slot